Perlick DDS36 36 1-Keg Self-Contain Direct Draw Beer Dispenser With 1 Tap and Digital Control

Discover the Perlick DDS36, a top-notch direct draw draft beer dispenser. It features a single section with a 36-inch width and self-contained refrigeration. This dispenser can hold one half barrel (less tapping) and maintains a temperature range of 33 - 40°F (0.5 - 4.5°C). It comes with a single solid door, a digital thermostat for precise control, and front venting for efficient operation. The unit has automatic defrost and evaporator condensate management, and includes a floor drain. Its exterior is crafted from stainless steel on the top, ends, and back. Powered by R134a and a 1/5 HP motor, it operates on 120 Volts, 60 Hertz, and 1 PH, with an amp rating of 3.2 Amps. The cord length is 8 inches. This beer dispenser is NSF Certified, meeting public health and food safety standards. It's also UL Canada & USA certified, ensuring it meets strict safety standards. And it comes with a NEMA 5-15P plug.

Using the Perlick DDS36 beer dispenser is a breeze. First, make sure it's plugged into a proper 120-volt outlet with the NEMA 5-15P plug. Then, set the desired temperature using the digital thermostat. The temperature range is 33 - 40°F (0.5 - 4.5°C), so pick the one that suits your beer best. Place your half barrel keg inside the dispenser. When you're ready to pour a cold one, use the single tap to draw the beer. As for maintenance, take advantage of the automatic defrost and evaporator condensate management. But still, check the floor drain regularly to make sure it's clear. Also, keep the exterior clean by wiping it down with a soft cloth. Remember, this dispenser is NSF Certified for food safety and UL Canada & USA certified for safety, so follow all safety instructions. And don't overload the dispenser beyond its capacity of one half barrel.